ACHS-1

The watch face for smart watches on the Wear OS platform supports the following functionality:

- Work in two automatic modes:
• Day mode (turns on from 6:00 AM to 8:00 PM)
• Night mode (turns on from 8:00 PM to 6:00 AM). In this mode, the fluorescent glow of elements coated with a phosphor is simulated
- The battery charge is displayed in the window of the small upper dial. The more red, the less battery charge remains. If the entire window turns red, this is a signal to charge the watch.
- The small upper dial shows the time in 24-hour mode
- The small lower dial shows the seconds.
- In the dial menu settings, you can set up 4 tap zones to call up applications installed on your watch and one information zone to display data from any application.

Please note that not all watch applications can be optimized to work with the information zone and may not display data or display it incorrectly. If you want to remove the display of the information zone, then simply set it to "None" in the dial menu (due to translation peculiarities in some countries, this menu item may be called differently)

I can guarantee the setup and operation of tap zones only on watches from Samsung. If you have a watch from another manufacturer, the tap zones may not work correctly. Please take this into account when purchasing a dial.

I also made an original AOD mode for this dial. To display it, you need to activate it in the menu of your watch. Please note that in AOD mode, the picture on the watch is redrawed once per minute. Therefore, the second hand stops in this mode.
For comments and suggestions, please write to e-mail: eradzivill@mail.ru

Join us on social networks

https://vk.com/eradzivill
https://radzivill.com
https://t.me/eradzivill
https://www.facebook.com/groups/radzivill

Sincerely,
Eugeniy Radzivill